Description Of Appliance; Technical Specifications - clage MBH 3 Gebrauchs- Und Montageanleitung

Description of appliance

1. Description of appliance
This instantaneous water heater is intended to provide the economical heating of water suf-
ficient for a single outlet, i.e. handwash basin, and is installed together with a sanitary water
fitting.
When the hot water tap is opened, the instantaneous water heater switches itself on auto-
matically and heats the water as it passes through the appliance. It is only then that the appli-
ance uses electricity. The temperature increase depends on the flow rate.

1.1 Technical specifications

Type
Energy efficiency class
Capacity
Rated Pressure
Connecting type
Heating system
Min. water resistance at 15 °C
Max. water inlet temperature
Rated voltage
Rated power
Rated current
Required min. cable cross-section
Hot water output at ∆t = 25 K
Switching on at
Switching off at
Approx. weight when filled with water
Protection class
Marking / Approvals
*) The declaration complies with the EU regulation No 812/2013.
1) The specific resistance can be asked for at your water distribution company.
2) Temperature increase from e. g. 15 °C to 40 °C.
MBH-GMA-de-en-fr-nl-pt-es-cs-sk-bg-09-2020-BUCH.indb 19 MBH-GMA-de-en-fr-nl-pt-es-cs-sk-bg-09-2020-BUCH.indb 19
MBH 3
Litre
MPa (bar)
1) Ωcm
°C
kW 3.5
A 15.2
mm 2 1.5
2) l/min 2.0
l/min 1.3
l/min 1.0
kg
19
MBH 4 MBH 6
A *)
0.2
1 (10)
pressure-resistant / pressureless
Bare wire heating system IES ®
1100
20
1~ / N / PE 230 V AC
4.4 5.7
19.1 24.8
2.5 4.0
2.5 3.3
1.8 2.2
1.4 1.7
1.5
IP 25
see rating plate
CLAGE
EN
MBH 7
2~ / PE 400 V AC
6.5
16.3
1.5
3.7
2.4
2.0
28.09.2020 12:54:54 28.09.2020 12:54:54