Device Description - Selve commeo Receive Betriebsanleitung

Device description

2. Device description
Antenna
Motor output
Outputs
Connect the motor to the outputs of the device. The arrows on
the device indicate the running direction of the motor.
Lamp encoding terminal
With a bridge between L and the lamp encoding terminal, the
receiver is switched to the night lighting receiver application.
The runtime will be set to unlimited in order to switch on a e.g.
lamp permanently. The receiver applications can only be set to
a limited extent (see CONFIGURATION mode, only in commeo
mode).
Venetian blind encoding terminal
With the bridge between L and the blind encoding terminal, the
receiver is switched to the blind receiver application outside. In
doing so, the intermediate position 2 is automatically attached
to the intermediate position 1 when this is approached in order
to automatically move the blind slats into the desired turn. The
receiver applications can only be set to a limited extent (see
CONFIGURATION mode, only in commeo mode).
Lamp
encoding terminal
31
EN
Connecting
terminals
Individual inputs
Venetian blind
encoding terminal
EN