Faq - EcoFlow Smart Home Panel Installationsanleitung

Privacy Policy
By using EcoFlow Products, Applications, and Services, you consent to the EcoFlow Terms of Use and
Privacy Policy, which you can access via the "About" section of the "User" page on the EcoFlow App
or the official EcoFlow website at https://ecoflow.com/pages/terms-of-use and https://ecoflow.com/
pages/privacy-policy.

8. FAQ

1. Can the SHP connect to a roof solar system, if yes, how?
For DC coupled solar panel system, currently, only solar panels with the correct output
parameters can be connected to the system. See the DELTA Pro manual for supported solar
panel specifications.
2. Does the SHP support split phase 240V output?
Yes, it does up to 30 amps, 7200W. This requires two DELTA pros and two infinity cables..
3. What's the maximum number of DELTA Pros and extra batteries that can be connected to the
SHP?
A maximum of 2 DELTA Pros and 4 extra batteries can be connected, with a total of 7200W output
power and 21.6kWh of energy.
4. Can multiple smart panels be used at the same time in one house?
Yes.
5. Can I manually switch between grid power and backup power?
Yes. Through the EcoFlow App.
6. How many circuits can SHP manage?
A maximum of 10 single phase circuits or 5 split phase circuits.
7. Is there any protection function in the SHP?
Yes. There is a relay based overcurrent and over-temperature protection system in both the grid
and backup mode. There is also a fuse for fault protection in the backup mode only.
8. Is there an AFCI function provided by the SHP?
No, an additional accessory needs to be purchased to house an AFCI breaker
24