EcoFlow Smart Home Panel Installationsanleitung Seite 40

During installation - Check wiring
1
With a multimeter in continuity setting, confirm that the hot wire in of each
SHP channel is not shorted to neutral.
2
With a multimeter in continuity setting, confirm that the hot wire in of each
SHP channel is not shorted to ground.
Commissioning
1
Make sure the power stations are enabled and that the stop button is off
(raised).
2
Close the upstream breaker of DELTA Pro and energize the DELTA Pro AC
Input channel. The grid indicator (white) will turn on if there is no fault.
3
Turn each branch circuit breaker back on one by one and check the indicator
status of each channel and power indicator. The indicators will stay white.
If you haven't done so already, download the EcoFlow App from Google
Play or the App Store and create an EcoFlow account. Open the app on your
4
mobile device, log into the app and add the Smart Home Panel to your device
pool. For first time users, the app will lead through a commissioning process
to setup the SHP.
5
Update the firmware of the Smart Home Panel to the latest version, then
check whether there are any errors reported on the app.
Follow the instructions in the app to conduct device wiring testing. If the
6
device wiring testing fails, correct the wiring following the prompts in the app
and re-run the wiring test.
7
Turn on the DELTA Pro and update the firmware to the latest version.
Connect the DELTA Pro and Smart Home Panel using the Infinity cable. For
8
split-phase, two DELTA Pros and two infinity cables are required. Turn on the
main power button of DELTA Pro, then press the On/Off button (AC button,
near the infinity port) on the SHP to enable each DELTA Pro.
Switch the power supply from grid to power station for each channel via
9
the app. Check whether the switchover is successful and there are no errors
reported on the app. Follow the instructions on the app to fix the errors if
any.
Set up the charging for DELTA Pro on the app (if AC grid charging is desired),
10
check whether the DELTA Pro is recharged successfully and there are no
errors reported on the app. Follow the instructions on the app to fix the
errors if any.
8