Opening The Stove; Mounting The Collar Shaft - WANDERS Balsa 100 Bedienungsanleitung

safe to keep them at a distance of at least 1.5m.

Opening the stove

Remove the 4 nuts with wrench 10 and remove the glass pane (caution: the pane is made of cast iron and is
rather heavy).
Do not touch the glass with your fingers as finger marks will burn into the glass.
!
Before relighting the stove, make sure that the door is closed correctly again

Mounting the collar shaft

Depending on the length and the form of the
concentric duct system Ø 100 - Ø 150 mm and
the outlet construction, you must mount a
collar shaft with a diameter of Ø 50mm or Ø
70mm according to the tables on page 26. The
standard passage for flue gases is Ø 100 mm
on the upper side of the combustion chamber.
Ensure that the collar shaft is
!
properly fitted. Fitting the collar shaft
incorrectly may cause defects to the
appliance.
27