Operation - Klarstein MOJAVE S 500 Bedienungsanleitung

OPERATION

General introduction of the control system
The Mojave S has an integrated WIFI control box, meaning there is no other
additional thermostat needed to control the heater. Once the heater has been
connected to the APP, the smartphone will take control and communicate with the
control box. If your home internet is not working, it is still possible to operate the
heater via the remote controller or button on the control box. Once the heater is
re-connected to the WIFI, the smart phone will take control again.
Controls
1 Wifi single indicator
2 Timer indicator
3 Heat-on status indicator
4 Remote control signal receiving
point
5 Heating On/off button
6 Wifi button
7 "+" button
8 "-" button
9 Timer button
10 Lighting On/off button
11. Color selection button
12. Brightness adjustment button
EN
23