Operation - Klarstein BORNHOLM Bedienungsanleitung

OPERATION

Commissioning
1. Carefully remove the appliance from the box. Save the carton for storage
during off-season.
2. Make sure that the on/off button is switched off before you plug in the
appliance.
3. The heater must be fully assembled and mounted according to the assembly
instructions.
4. It is better not to use the same electrical connection with other power-
intensive appliances to avoid overloading the circuit.
Turning the appliance on: Connect the appliance to a power supply. The
operating light turns on after a short humming sound. Switch on the appliance
with the on/off button (13). The current room temperature now lights up on the
display.
Setting the time:Press and hold the settings button (1) and the up arrow button
(2) simultaneously for 10 seconds. The "week" display (6) will blink, indicating that
the time setting has been activated. Choose a week day using the arrow keys.
Press the "Settings" button (16) and the "hour" display (5) will blink. Using the
arrow buttons (14, 15), choose the hour again. Press the "Settings" button (16)
to set the minutes required. Using the arrow buttons (14, 15), select the minute
required and confirm the time set with the "Settings" button (16).
Setting the temperature: Press the "Settings" button (16). The temperature
display (17) will blink. Then select the temperature required with the arrow buttons
(14, 15). Confirm using the "Settings" button (16) or refrain from pressing any
other buttons for 5 seconds to ensure the setting are automatically confirmed.
Setting the performance level: Using the Down arrow (14), select the low heat
setting. The symbol will show on the display. Select the high heat setting using
the Up arrow (15). The
push (21) to switch between the high and low heat settings.
Child safety mechanism: Hold down both arrows (14, 15) for three seconds.
The child safety symbol will appear on the display. The system is then locked and
manual setting of the appliance cannot be undertaken. After 2 seconds the display
will show the surrounding temperature. When this setting is activated, the child
safety symbol will appear each time a button is pressed at random.
To unlock: Press and hold both arrows (14, 15) for 3 seconds. The appliance will
unlock. You can now set the appliance up as required.
symbol will show on the display. Alternatively, you can
EN
19