Mounting Installation - Klarstein MOJAVE S 500 Bedienungsanleitung

capable of leaving the room by themselves. The surface of the heater can
reach a surface temperature of up to 95°C, keep out of reach of children and
disabled persons.
• Keep away babies and children from all packaging material such as plastic
bags to avoid danger of suffocation.
Electric safety directions
• When installing, repairing or servicing the heater it must be turned off and
disconnected from power. Before installation please check if the heater is free
of damages.
• If the heater or the power cord is damaged in any form do NOT use the
heater. Repairs, maintenance or any changes must be carried out by an
authorized dealer.
• DO NOT attempt to repair the heater by yourself, this will void your warranty.
• • If the heater has been dropped do NOT operate it and contact your dealer to
make sure it is free of any damages.
• This heater is designed to operate at 220V-240V, 50Hz AC. If your supply mains
do not comply with this, do NOT use the heater.
• The heater must not be located immediately below a socket-outlet
• WARNING: The glass heater must not be used if the glass surface is damaged.
• WARNING: Do not use this heater in small rooms when they are occupied
by persons not capable of leaving the room on their own, unless constant
supervision is provided.

MOUNTING INSTALLATION

The kit supplied in the package is designed for mounting vertically on a solid
wall. If mounted onto other types of walls, you will need appropriate fixings (not
supplied). Please make sure the wall is safe to mount. We highly recommend
to have the panel installed by a qualified electrician or authorized installer. The
heater must be at least 20 cm removed from all objects, walls, etc.; the distance to
the floor must be at least 20 cm.
Please be noted that this hybrid heater can only be mounted horizontally, do not
mount it vertically.
EN
21