Electrical Specifications; Optional Extras - EdilKamin IDROTECH Installation, Betrieb Und Wartung

Hopper capacity
Efficiency
Overall useable power
Useable water power
Time between refuellings (min/max)
Fuel consumption
Minimum draught
Maximum pressure
Heatable room totale *
Weight including packaging (steel/ceramic)
Smoke duct diameter (female)
Air intake pipe diameter
* The heatable room dimensions are calculated assuming the use of pellets of the type described in the note, and home
insulation which complies with Italian law No. 10/91.
Power supply
On/off switch
Average power consumption
Average power consumption during ignition
Remote control frequency (optional extra)
Protection on mains power supply
Electronic circuit board protection
CONSOLLE
AUX SMOKE RPM
RS 232
SERVICE
LITHIUM
LITHIUM
SMOKE EXTRACTION
MOTOR
TM 90° C TM 120° C
90 120
SCREW FEEDER
MOTOR
TECHNICAL AND HEATING SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

INT J
WATER OUTLET
TEMPERATURE
DETECTOR
MANDATA ACQUA
230V AC POWER
FUSE 2A
SUPPLY 50Hz +/- 10%
IGNITION ELEMENT
FUSE 2A
WATER
CIRCOLATORE
CIRCULATION
ACQUA
PUMPE
150
400
The DEALER may install an optional device for remote on/off
operation, for example a dialler or room thermostat, on the AUX
port (clean voltagefree contact).

OPTIONAL EXTRAS

DIALLER (code 281900)
GSM dialler for pellet stoves, to turn on/off remotely with a
mobile phone text message.
REMOTE CONTROL (code 254160)
It is possible to buy a remote control to turn the
stove on and off and adjust it remotely.
- 23
-
27 kg
90,1 %
11,3 kW
10 kW
10/33 hours
0,8/2,7 kg/h
12 Pa
1,5 bars
295 m³
176/187 kg
80 mm
40 mm
230Vac +/- 10% 50 Hz
yes
W
W
infrared
fuse 2A, 250 Vac 5x20
fuse 2A, 250 Vac 5x20