Safety Information - EdilKamin IDROTECH Installation, Betrieb Und Wartung

Dear Sir or Madam,
thank you for choosing our IDROTECH stove.
Before using your stove, please read this booklet carefully so that you may exploit all its features to the full in complete safety.
Please remember that the 1st ignition must be carried out by the dealer, which verifies the installation and completes the guarantee.
The manufacturer cannot be held liable for any damage deriving from stove use following incorrect installation, incorrect maintenance
or misuse.

SAFETY INFORMATION

THE STOVE MUST NEVER BE RUN WITHOUT WATER IN THE SYSTEM.
"WATERLESS" IGNITION DAMAGES THE STOVE.
The stove is designed to heat water through the automatic combustion of pellets in a firebox.
The only risks which may derive from using the stove are linked with non-compliance with the installation instructions, direct con-
tact with live electrical parts (inside) or with the fire or hot parts, and the introduction of foreign substances.
If components fail, the stove is fitted with safety devices which shut it down. This must be allowed to happen without interference.
For correct operation, the stove must be installed in compliance with the instructions herein, and the door must not be opened during
operation: combustion is managed automatically so no manual operations are needed.
Never put foreign substances in the firebox or hopper.
Do not use flammable products to clean the smoke duct.
Firebox and hopper components must only be cleaned WHEN COLD using a vacuum cleaner.
The glass must be cleaned when COLD with a special product (e.g. GlassKamin) and cloth. Do not clean when hot.
During stove operation, the outlet pipes and door reach high temperatures.
Do not keep objects which are not able to withstand heat in the immediate vicinity of the stove.
NEVER use liquid fuels to light the stove or rekindle the embers.
Do not block ventilation openings in the room where the stove is installed or air inlets in the stove itself.
Do not wet the stove, and do not put wet hands near electrical parts.
Do not fit reducers on the smoke outlet pipes.
The stove must be installed in a suitable place as regards fire safety, and provided with all the facilities (power supply and outlets) it
requires for correct safe operation.
CE STANDARDS and COMPLIANCE DECLARATION
EdilKamin declares that the Idrotech boiler-stove complies with the following C.E. marking European Directives.
European Directive 73/23/EEC and later modification 93/68/EEC
89/336/EEC and later modifications 93/68/EEC; 92/31/EEC; 93/97/EEC
In the case of installation in Italy, refer to Italian standard UNI 10683/05 or later modifications. For connection to the domestic hot
water and heating system, have the plumber issue a declaration according to Italian law No 46/90.
In all other countries, check the laws and national regulations on the subject.
- 20
-