D - Using The Product; Identify And Speak To The Visitor; Opening An Electric Lock And An Automatic Control System; Activate The Intercom Panel From The Monitor - avidsen 340100 Bedienungsanleitung

COLOUR VIDEO INTERCOM 7"

D - USING THE PRODUCT

1 - IDENTIFY AND SPEAK TO THE VISITOR

The visitor presses the intercom panel's name plate:
The chime sounds through the monitor's speaker
and the intercom panel's video camera is activated.
If the visitor is positioned within the camera's field of
vision, their image will appear on the monitor for 30
seconds. After 30 seconds,
the monitor will return to sleep mode.
To speak with the visitor, press the
end the conversation and deactivate the intercom
panel, press the
2 - ACTIVATE THE INTERCOM PANEL
FROM THE MONITOR
To identify a visitor without them knowing they are
being observed or to simply look outside, press the
button: the view from the intercom panel will
then appear on the screen for 60 seconds.
If you wish to communicate directly with the outside,
press once on the
video camera is displayed.
This particularly useful feature allows you to observe
the visitor, even if they haven't rung.
EN 8
button. To
button.
button when the external
3 - OPENING AN ELECTRIC LOCK AND AN
AUTOMATIC CONTROL SYSTEM
If the device is equipped with an electric lock and/
or an automatic control system (see "Connection"
paragraph), press the
the button (for the automatic control system)
to let a visitor enter.
Warning: the screen must be switched on before
the dry contact and powered output controls can
function. If the screen is off, it must be switched on
using the button
button (for the lock) or