D - Using The Product; Image Settings; Doorbell Melody Selection; Doorbell Melody Volume Selection - avidsen LUTA 2+ Bedienungsanleitung

Colour video interCom

1 - IMAGE SETTINGS

Press and hold the button behind the monitor to
adjust the brightness.
Press and hold the button behind the monitor to
adjust the contrast.
Press and hold the button behind the monitor to
adjust the colour.

2 - DOORBELL MELODY SELECTION

Select the melody by using the button (9 melodies
to choose from).

d - uSiNg ThE prOduCT

3 - DOORBELL MELODY vOLUME
SELECTION
Select the doorbell volume using the

4 - USAGE INSTRUCTIONS

A visitor pressing on the name plate makes it ring
for a few seconds and lights up the screen for 45
seconds.
To answer, press on the
speak. If no one answers, the doorbell stops after
a few seconds.
Note: It is possible to activate the video without a
call from outside using the
In this case the sound is only activated from the
outside inwards.
When the screen is on, press any time on the
door release control button to activate the electrical
door release connected to the monitor.
button.
button in order to
button.
en
11