Mitre Saw; Machine Information; Safety Instructions - Ferm MSM1034 Originalbetriebsanleitung

MITRE SAW

The numbers in the following text correspond
with the pictures at page 2 - 4
Before using the machine, thoroughly
read these instructions for use. Make
sure that you know how the machine
works and how to operate it. Maintain the
machine according to the instructions and
make sure that it works properly. Keep
these instructions for use and the other
documentation with the machine.
Intended use
The electro tool is intended as a stationary
machine for making straight lengthways and
crossways cuts in wood. Horizontal mitre angles of
-45° to +45° as well as vertical bevel angles of -45°
are possible.
Contents

1. Machine information

2. Safety instructions

3. Assembly and accessories
4. Operation
5. Service & maintenance
Check the appliance, any loose parts and
accessories for damage caused during transport.
1. Machine information
Technical specifications
Voltage
Capacity
Machine class (double insulated)
Revolutions, not under load
Saw blade measurement
Angle for mitring (left and right)
Angle for bevelling (only left)
Mitre saw max. sawing capacity:
Mitre 0º, Bevel 0º
Mitre 45º, Bevel 45º
Mitre 45º, Bevel 0º
Mitre 0º, Bevel 45º
Weight
Lpa (sound pressure)
Lwa (acoustic capacity)
Vibration level
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
Ferm
accordance with a standardised test given in EN
61029; it may be used to compare one tool with
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
• using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns.
Features
Figs. A
1. On/off switch
2. Locking lever for saw head
3. Locking knob for saw head
4. Grip
5. Saw blade
6. Guard
7. Spindle lock button
8. Locking knob for mitre angle
9. Scale for mitre angle
10. Locking knob for bevel angle
11. Scale for bevel angle
12. Saw head
13. Saw table
14. Guide fence
15. Dustbag connection
16. Carbon brush holder
17. Transport grip
230 V
18. Mounting hole
1400 W
II
4800/min
2. Safety instructions
210x30x2.6mm
45º
Explanation of the symbols
45º
50x116 mm
30x85 mm
50x85 mm
30x116 mm
6 kg
93.6+3 dB(A)
106.6+3 dB(A)
2.863 m/s
2
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
EN
5