Storage; To Put The Product In Storage; Disposal; To Discard The Product - Anslut 006859 Bedienungsanleitung

● Remove the product from the wall at regular intervals and
clean behind the product.
● Clean the air intakes and air outlets with a vacuum
cleaner at regular intervals.
Warning! Do not put objects into the holes of the air
intake or air outlet. Risk of electric shock.
6

Storage

6.1 To put the product in storage

Warning! Let the product become cool before you put
the product in storage.
Caution! Do not wind the power cord around the
product.
Caution! Do not fold or roll up the power cord too
tightly.
Caution! Make sure that there is no pressure on the
power cord when you out the product in storage.
● Disconnect the power plug from the power outlet.
● Put the product in its original packaging if it is possible.
● Put the product in a vertical position in a clean, dust-free
and dry place.
7

Disposal

7.1 To discard the product

Make sure that you follow local regulations when you
discard the product. Do not burn the product.
34
8

Technical data

Technical data
Rated voltage
Power output
Protection rating
Dimensions
Cord length
Nominal heat output (Pnom)
Minimum heat output, indicative
(Pmin)
Maximum continuous heat
output (Pmax, c)
Auxiliary electricity consumption:
At normal heat output (elmax)
At minimum heat output (elmin)
In standby mode (elSB)
230 V ~ 50 Hz
400 W
IP24
400x400x50 mm
1.4 m
0.4 kW
0 kW
0.4 kW
0 kW
0 kW
0.000357 kW
2022_001