System - AVer AVerVision A30 Bedienungsanleitung

System

 Language: Select a language.
 Output Display: Select a resolution for the output display. The unit will automatically detect the
output device resolution and configure to the highest resolution.
 Backup: Select a storage to backup the images from the internal Embedded storage to the
selected storage.
 Save Setting: Save the current settings, such as Brightness, Preview Mode, Contrast and etc., as
a profile. Up to 3 profiles can be configured. To do this, after configuring all the settings, select a
profile and then press the
clear a setup profile, refer to Recall Setting below.
 Recall Setting: You can erase the settings of the setup profiles in the Save Setting above. To do
this, select a profile and then press the
settings will be cleared.
 Information: Display the unit's information.
 Default: Restore all the settings to factory default settings.
button on the Remote Control to save the settings as a profile. To
button on the Remote Control, the selected profie
15