AVer AVerVision A30 Bedienungsanleitung Seite 13

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
Name
(12)
(13)
(14)
(15)
(16)
(13) PC 1/2
(17)
(18)
(19)
(14) Freeze / Stop
(20)
(21)
(22)
(23)
(15) Spotlight
(16) Split Screen
(17) Mode
(18) Timer
(19)
(20) Lamp
(21) Brightness
+/-
(22) Default
(23) DEL
Function
the video. Press
playback.
- Press the Freeze/Stop button to stop playing
back.
In PIP mode, press this button to switch the
video source displayed on the Main View.
- In Live mode, freeze live images.
- In Playback mode, stop video playback.
Spotlight will focus on the central area of the
camera view and cover all of the rest areas.
To enable Spotlight:
1. Press the Spotlight button to enter Spotlight
setup page in OSD menu.
2. Select On and press
Spotlight, the central area of the camera
view will be displayed.
3. Optionally use ▲,▼,◄, & ► to adjust the
revealed area.
4. To exit Spotlight mode, press the Spotlight
button again.
Divide the screen into two. One side displays
the camera live view and the other side
displays the captured image or recorded video
thumbnails from the USB flash drive.
The split options include Left, Right, Top and
Bottom.
After selecting a split option, use ▲,▼,◄, & ►
to select a capture image or video. Press
to display the image or playback the video.
Press to switch among Normal, High Quality
and Motion modes.
Press the Timer button to enter Presentation
Timer setup page in OSD menu. Select to
Start/Pause/Stop the timer countdown.
Select Timer Interval to set the timer duration.
- Confirm a selection.
- Enter the submenu in the OSD menu.
- Play/Pause video playback.
- Display the captured images.
Turn on/off the LED lamp.
Adjust the brightness.
Reset to factory default setting.
Delete the selected picture/video in Playback
mode.
7
again to pause
to enable