Remote Control - AVer AVerVision A30 Bedienungsanleitung

Remote Control

The remote control requires two "AAA" batteries. Make sure batteries are installed properly before use.
You can access all the features of the unit with the remote control.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
Name
(1) Power
(12)
(2) Camera
(13)
(14)
(3) Record
(15)
(16)
(17)
(18)
(4) Capture
(19)
(20)
(21)
(22)
(23)
(5) Visor
(6) Rotate
(7) Menu
(8) ▲,▼,◄, & ►
(9) Auto Focus
(10) Zoom +/-
(11) Zoom 1x
(12) Playback
Function
Turn on/off the unit.
Enter the Camera mode (live view).
Start/stop audio/video recording. The
recordings will be saved in a USB flash drive.
Capture still image. In continuous capture
mode, press this button again to stop. The
images will be saved in the selected storage.
Visor covers part of the camera view and allows
the presenter to reveal the desired part of the
camera view.
To enable Visor:
1. Press the Visor button to enter the Visor
setup page in OSD menu.
2. Select On and press
the upper-left part of the camera view will be
exposed.
3. Use the ▲,▼,◄, & ► buttons to reveal
more of the covered camera view.
4. To exit Visor mode, press the Visor button
again.
Rotate the image by 0/180°.
Enter or exit the OSD menu.
- Select options in OSD menu. Enter the
previous/next level page in OSD menu.
- In Zoom mode, use ▲,▼,◄, & ► to navigate
the live view.
- In Playback mode, use ▲&▼ to increase
and decrease the volume.
- In Playback mode, use ◄&► to play the
video backward and forward.
Adjust the focus automatically.
In Camera Live mode or Split Screen (live) and
Playback (image) mode, use Zoom +/- to zoom
in or zoom out the images.
Reset zoom level to 100%.
Playback the captured pictures/videos from the
USB flash drive.
- Use ▲,▼,◄, & ► to select an image or
video.
- Press to display the image or playback
6
to enable Visor,