Picture In Picture - AVer AVerVision A30 Bedienungsanleitung

Picture In Picture

The Picture In Picture (PIP) function allows you to display two camera streams, one from the A30 and
the other from an USB camera, on a screen. It's useful for a presenter to display the content of the
materials and the presenter/audience simultaneously.
 PIP Mode: Manually enable or disable the PIP mode. To manually display the PIP mode:
1. Connect an USB camera to the USB Type-A port of A30.
2. Go to OSD menu > Picture In Picture > PIP Mode and select On. You should see the PIP
mode displayed on the screen.
3. Optionally switch the main view, or adjust the position or size of the sub view.
4. To turn off the PIP mode, go to OSD menu > Picture In Picture > PIP Mode and select Off.
 Main Screen Switch: Select a video source to be displayed on the Main View. Options include
A30 and External Source (camera connected to the USB Type-A port of A30).
 Position: Select a position for the Sub View. Options include Bottom Left, Top Left, Top Right,
Bottom Right and Manual. If Manual is selected, you can position the Sub View manually. Use
the ▲, ▼, ,  buttons on the Remote Control to select a position.
 Size: Select a size for the Sub View. Options include Large and Small.
 Start PIP Automatically: Turn on this function if you want A30 to automatically display PIP Mode
when an USB camera is connected to A30. For this function to work:
1. Go to OSD menu > Picture In Picture > PIP Mode and select On.
2. Go to OSD menu > Picture In Picture > Start PIP Automatically and select On.
3. Connect an USB camera to the USB Type-A port of A30. You should see the PIP mode
displayed on the screen.
Main View
Sub View
11