Remote Control - AVer AVerVision F50+ Bedienungsanleitung

.
Re mote Co nt ro l
The remote control requires two (2) "AAA" size batteries, make sure batteries are installed
properly before use. You can access all the features of AVerVision F50+ with the remote.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10 )
(11)
(fig. 1.6)
Name
(1) POWER
(12 )
(2) CAMERA
(13 )
(14 )
(3) RECORD
(15 )
(16 )
(17 )
(18 )
(19 )
(4) CAPTURE
(20 )
(5) VISOR
(21 )
(6) ROTATE
(22 )
(7) MENU
(23 )
(8) ▲,▼,◄, & ►
(9) AUTO FOCUS
(10) ZOOM +/-
(11) ZOOM 1X
(12) PLAYBACK
(13) PC 1/2
(14) FREEZE /
STOP
(15) SPOTLIGHT
(16) SPLIT
SCREEN
(17) MODE
9
Function
Turn the unit on/standby.
Camera mode displays the video signal
from the built-in camera.
Start/Stop audio & video recording.
Video recording can only be saved
either in a SD memory card or a USB
flash drive.
Capture still image in Camera mode. In
continuous capture mode, press this
button again to stop.
Not supported.
Rotate the image by 0/180° in Camera
mode.
Open and exit the OSD menu.
- Pan and zoom-in image (above digital
zoom level) in both live and playback
mode.
- Select options in OSD menu.
- Use ▲&▼ to increase and decrease
the video playback volume.
- Use ◄&► to play the video
backward and forward.
Adjust the focus automatically.
Increase/decrease the image
magnification in camera and picture
playback mode.
Reset zoom level to 100%.
View the captured picture/video from
the memory in 16-thumbnail images.
PC mode displays the video signal
from the RGB/HDMI Input port of
AVerVision F50+.
- Freeze live images.
- Stop video playback.
Not supported.
Not supported.
Press to switch between Normal,
Motion, and High quality, Microscope,
Infinity, or Marco mode.