1-3-Fuel/Water Separator Filter - Zodiac MEDLINE 7.5 Handbuch

The probe supplied is to American standard:
Impedance (tank empty position) 30 Ohms
Impedance (tank full position) 240 Ohms
All the dials on the market are compatible, with a few very rare exceptions.
To connect it, refer to the electrical diagram.
V -1-3-Fuel/water separator filter
In order to protect the engine, a water / fuel separating filter is placed on the engine's fuel supply
system.
Ref. DESCRIPTION
1 Water/fuel separator filter
Replaceable filter cartridge
2
Make sure that there is no water in the metal bowl each time you use your boat:
- Slightly unscrew the drain cap (do not remove it completely);
- Drain the water;
- Screw the drain cap back on if only fuel remains in the bowl.
Do this more often if your engine is not functioning correctly.
INSTALLATION AND CIRCUIT: FUEL
WARNING!
It is vital to have a gauge dial. It is supplied with the engine. If your
boat does not have one, contact your dealer.
2
1
Page 24 / 55
Issue 2