Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Residual risks
Even if you are operating this product in
accordance with all the safety require-
ments, potential risks of injury and dam-
age remain. The following dangers can
arise in connection with the structure and
design of this product:
1. Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
2. Injuries and damage to property due to
broken application tools or the sudden im-
pact of hidden objects during use.
3. Danger of injury and property damage
caused by flying objects.
Warning! This product produces an
electromagnetic field during opera-
tion! This field may under some circum-
stances interfere with active or passive
medical implants! To reduce the risk of se-
rious or fatal injury, we recommend per-
sons with medical implants to consult their
doctor and the medical implant manufac-
turer before operating this product!
126
EN
Care & Maintenance
Caution! Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
- Motor brushes can only be replaced by a
qualified person.
Caution! If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.
Declaration of conformity
We declare, that the product described
in Technical Data:
750 W Angle Grinder PE-115 WS
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
and in accordance to the following applicable
harmonized standards:
EN 60745-1:2009+A11
EN 60745-2-3:2011+A2+A11+A12+A13
EN 55014-1:2006+A1+A2
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Andreas Back
Head of Quality Management, environment &
CSR
Person authorised to compile the technical file
Bornheim, 22.02.2018
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
Disposal
The crossed-out wheeled bin sym-
bol requires separate disposal for
waste electrical and electronic equip-
ment (WEEE). Such equipment may
contain valuable, but dangerous and hazard-
ous substances. You are required by law to
return these products to a designated collec-
tion point for the recycling of WEEE and must
not under any circumstances dispose of them
as unsorted municipal waste. In this way, you
can help to conserve resources and protect
the environment.
In Germany, HORNBACH is obliged:
-
To take back old appliances of the same
type free of charge in HORNBACH stores
when you purchase a new electrical or elec-
tronic appliance.
-
To take back up to 3 WEEE of the same
type (up to max. 25 cm edge length) free of
charge in HORNBACH stores, even if you do
not purchase a new appliance.
-
When delivering a new electrical or elec-
tronic appliance to a private household, to
collect an old appliance of the same type
free of charge or to enable you to return it in
your immediate vicinity.
For further details, please consult www.horn-
bach.com or your local authorities.
Children must not play with plastic bags and
packaging material, due to the risk of injury
and suffocation. Store such material safely
or dispose of it in an environmentally friendly
way.
EN
127
Werbung
Inhaltsverzeichnis
