Herunterladen Inhalt Inhalt Diese Seite drucken

Removal Of The Seat Unit Fabric; 5-Point Harness (Flat); Buckle The Child; Change Position Of The Harness - Emmaljunga NXT90 ERGO Bedienungsanleitung

Inhaltsverzeichnis

Werbung

14. 6 Attach the crotch strap by positioning it
around the bumper bar and secure it by faste-
ning the press stud.
14. 7 Attach the hood into the frame
14. 8 Attach the hood in place using the velcro
strips attached to the seat unit fabric.
WARNING
It is important that the fabric is
always correctly fitted. The seat unit should
never be used without fully fitting the seat unit
fabric.
WARNING
Before you use the stroller, check
that the seat fabric is secure and that all the zips
and press studs are firmly and correctly in place.
WARNING
It is important that the seat unit
fabric is always assembled correctly.
WARNING
Never use this product without fully
assembling the seat unit fabrics onto the frame
first.

15) REMOVAL OF THE SEAT UNIT FABRIC

15.1 Press the buttons on both sides of the
hood and remove the hood from the seat unit.
15. 2 Open the press studs on the seat unit and
on the footrest.
15. 3 Take out the harness straps through the
holes in the fabric.
15. 4 Take out the crotch strap completely from
the fabric remove the seat unit.
WARNING
The hood must always be assemb-
led when the pram is in use.

5-POINT HARNESS (FLAT)

1) BUCKLE THE CHILD

Adjust the 5-Point Harness
1.1 Place the 5 harness straps in front of the
child so that the child is not sitting on them.
1.2 Assemble the left shoulder and waist straps
by sliding the upper left buckle into the lower
left buckle until it clicks into place.
1.3 Assemble the right shoulder and hip straps
by sliding the upper right buckle into the lower
right buckle until it clicks into place.
1.4 Click the right buckle over the left buckle
until they are held together as a unit. It is very
important that they sit together properly and
that they cannot be pulled apart.
1.5 Lock the harness with the harness lock on
the crotch strap with a "CLICK"
WARNING
Always check that the belt is proper-
ly closed by pulling on it.
1.6 Adjust the harness using the sliding adjus-
ters (3) on the shoulder and hip belts so that the
belt fits snugly on the child's body.
NXT SELECT V1.2
WARNING
Always fasten the child in with the
harness when the child is sitting in the stroller.
Check that all buckles are correctly fastened and
that the harness is securely assembled in the
stroller.

2) CHANGE POSITION OF THE HARNESS

2.1 Remove the seat unit fabric as described
under point 15.
Shoulder straps
2.2. Unfasten the shoulder strap attachments
from the rest of the harness.
2.3. Pull the shoulder straps backwards through
the back part of the seat and reinsert them into
the other opening to the front.
2.4 Refasten the shoulder strap fastener to the
harness waist strap.
Repeat this step on the other side.
The Crotch Strap
2.5 Unfasten the crotch strap attachment from
the rest of the harness and guide the crotch
strap down through the seat plate.
2.6. Insert the strap through the other opening
and refasten the harness.Reassemble the cover
as described under point 14.
IMPORTANT
Ensure that the shoulder straps
and crotch straps are correctly fastened.
WARNING
Before you use the pram again
always check that the seat unit fabric is secure
and that all press studs are securely and proper-
ly fastened.
WARNING
It is important that the seat unit
fabric is always correctly fitted
WARNING
Never use the pram without making
sure the seat unit fabric is correctly assembled
on the frame first.
SE
EN
CZ
DE
DK
EE
ES
FI
NO
SVK
BG
FR
GR
HR
HU
IS
IT
LV
LT
ML
NL
PL
RO
PT
RS
RU
SL
TR
51

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Nxt90 flatNxt90 selectNxt60 ergoNxt60 flatNxt60 select

Inhaltsverzeichnis