Inhaltsverzeichnis
Werbung
that the harness is securely assembled in the
stroller.
WARNING
Never use the seat if parts of the
5-point harness are missing or if the harness is
damaged. Always check that the harness is
properly closed.
WARNING
The 5-point harness contains
magnets or magnetic components. Magnets
that attract each other or a metallic object in the
human body can cause serious injury or death.
Seek medical advice immediately if magnets are
swallowed or inhaled.
WARNING
Medical devices such as implanted
pacemakers and defibrillators might contain
sensors that respond to magnets and radios
when in close contact. To avoid any potenti-
al interactions with these devices, keep the
harness a safe distance away from your device
(more than 15 cm apart). But consult with your
physician and your device manufacturer for
specific guidelines.
2) CHANGE POSITION OF THE HARNESS
2.1 Shoulder straps, Remove the hood. Remove
the shoulder pads. Push the shoulder and hip
straps through the holes in the seat cover.
2.2 Open the zipper underneath the seat.Open
the press studs that secure the seat fabric over
the frame.
Open the press stud that holds the adjustment
handle.Pull the back plate out of the fabric and
place the shoulder straps in the desired position
in the back plate.Insert the shoulder straps into
the seat fabric in the same position.Slide the
back plate back into the seat cover.
2.3 - 13.3.3 The Crotch Strap
Pass the crotch strap through the seat cover and
the seat plate. Then mount the crotch strap in
the desired position in the seat plate and pass
the crotch strap in the same position through
the fabric. Close the zipper at the bottom of the
seat. Close the press studs firmly over the frame
on both sides.Thread the strap through the hole
in the fabric and secure it around the adjust-
ment handle with the press stud.
Put the shoulder pads onto the shoulder straps.
WARNING
Before you use the pram again
always check that the seat unit fabric is secure
and that all zips are securely and properly
fastened
WARNING
It is important that the seat unit
fabric is always correctly fitted
WARNING
Never use the pram without making
sure the seat unit fabric is correctly assembled
on the frame first.
NXT SELECT V1.2
SEAT UNIT FLAT
1) ASSEMBLY AND USE OF THE SEAT UNIT
1.1 The seat unit is delivered fully assembled.
Only the bumper bar and the hood need to
be assembled.Insert the bumper bar into the
brackets on both sides of the seat until you hear
a click.
1. 2 Fasten the crotch strap around the bumper
bar.
WARNING
The bumper bar should always be
fitted when using the seat unit.
WARNING
Always check that the bumper bar is
correctly attached to the seat unit before use.
2) OPEN THE BUMPER BAR
2.1 Unfasten the crotch strap.
2.2 Press the button on the inside of the bumper
bar to open
WARNING
The bumper bar should always be
fitted when using the seat unit.
WARNING
Always check that the bumper bar is
correctly attached to the seat unit before use.
3) CLOSE THE BUMPER BAR
3.1 Click the bumper bar into the bracket until
you hear a "click".
3.2 Fasten the crotch strap around the bumper
bar.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
The bumper bar should always be
fitted when using the seat unit.
WARNING
Always check that the bumper bar is
correctly attached to the seat unit before use.
WARNING
Never carry the seat unit/stroller by
the bumper bar.
4) ASSEMBLY / USE OF THE HOOD
4.1 Insert the hood in both sides of the seat until
you hear a click.
4.2 Secure the back of the hood by using the 3
velcro strips.
You can click Emmaljunga's footmuff (accessory)
into place using the eyelets/D-rings behind the
backrest.
WARNING
Ensure that children are kept away
from all moving parts of the stroller to avoid risk
of injury.
WARNING
Never carry the seat unit/stroller by
the hood.
5) ADJUST THE HOOD
5.1 Pull the hood gently forward or backward to
the desired position.
SE
EN
CZ
DE
DK
EE
ES
FI
NO
SVK
BG
FR
GR
HR
HU
IS
IT
LV
LT
ML
NL
PL
RO
PT
RS
RU
SL
TR
49
Werbung
Inhaltsverzeichnis
