Inhaltsverzeichnis
Werbung
6) EXTENDING THE HOOD
6.1 To extend the hood to protect the child from
weather you can open the zip on the hood.
6.2 Pull the hood forward and the hood extends.
There is a ventilation and UV/insect net built in
the back of the hood (only on certain models).
WARNING
The hood should always be assemb-
led when the stroller is in use.
IMPORTANT!
The hood cannot be folded
down when the optional apron is attached to
the hood.
7) INSECT NET (DELIVERY WITH CHASSIS)
7.1 Attach the Insect net using the zipper on the
hood. Pull the elasticated band of the insect net
completely over the front foot area.The Insect
net is delivered with the chassis.
7.2 Use the press stud to secure the elasticated
band of the insect net onto the seat unit. Repe-
at on the other side.
7.3 Storage pocket for the Insect net.
8) ATTACH THE SEAT UNIT ON THE CHAS-
SIS
8.1 Click the seat unit into the chassis, make
sure it clicks in properly and securely on both
sides.The seat unit can be attached in the
direction of travel or against the direction of
travel.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING
Always check that the seat unit is
securely fixed to the chassis before the pram is
used.
WARNING
Hold the carrying handles until the
seat unit is in place.
9) REMOVAL OF THE SEAT UNIT FROM THE
CHASSIS
9.1 Pull both handles on the sides upwards and
lift the seat unit off the chassis.
WARNING
Ensure that children are kept away
from all moving parts of the stroller to avoid risk
of injury.
WARNING
Never leave a child in the seat unit
when removing/attaching the seat unit.
10 ADJUST THE BACK REST.
The back rest of the seat-unit can be adjusted
into various positions.
Adjust the back rest by squeezing the plastic
adjuster together on the back of the seat unit
and recline the back rest gently to the desired
position. To adjust the back rest into upright
position pull the back rest forward.
50
Open the zippers on both sides of the hood
before you put the backrest in the full lying
position.
WARNING
Ensure that children are kept away
from all moving parts of the stroller to avoid risk
of injury.
11 ADJUST THE FOOTREST
Pull the grey handle on either left or right side
of the footrest to adjust it.
Please Note! Maximum weight on the footrest
is 3kg.
WARNING
Never let your child stand on the
footrest.
WARNING
Ensure that children are kept away
from all moving parts of the stroller to avoid risk
of injury.
12 ASSEMBLY OF THE APRON (
12.1 Pull the apron over the footrest.
12.2 Fasten the apron with the press studs on
the inside of the hood and on the seat frame.
IMPORTANT!
The hood cannot be folded
down when the apron is attached to the hood.
12.3 Open the zip in the middle of the apron
when taking your child in or out of the pram.
13 RAINCOVER (
ACCESSORIES
13.1 Assemble the rain cover by placing it over
the hood and pull over the carrycot or the seat
unit.
13.2.The rain cover has a large window at the
top opening that you can open and close with
the Velcro fasteners.
13.3. Make sure that the side ventilation win-
dows are always open and free so that ventila-
tion is ensured. Always use rain protection when
it is raining or snowing. If the stroller is wet, try
to dry it first before using the rain cover. Let the
rain cover dry properly before putting it back in
its pocket.
14) ASSEMBLY OF THE SEAT UNIT FABRIC
14. 1 Place the seat unit fabric in the seat unit.
Thread the shoulder straps through the fabric.
14. 2 Thread the crotch strap through the seat
fabric (see illustration).
14. 3 Thread the waist straps through the seat
unit fabric.
14. 4 Fasten all of the press studs on the seat
unit.
14. 5 There are a total of 13 press studs. 5 press
studs on each side and 3 on the back.
)
ACCESSORIES
)
NXT SELECT V1.2
Werbung
Inhaltsverzeichnis
