Inhaltsverzeichnis
Werbung
WARNING!
Ensure that children are kept away
from all moving parts if you adjust the pram to
avoid risk of injury.
2) ASSEMBLY OF THE BACK WHEELS
2.1 Wipe dirt from the axles before you put on
the wheels. Press the button on the rear wheel.
Insert the metal shaft axle in the rear wheel.
Ensure that the shaft clicks into the wheel
WARNING Check that the wheels are firmly
fixed and cannot be pulled off the shaft.
2.2 Push the axle shaft into the chassis.
2.3 Lock the shaft with the grey lock that sits
on the brake bar. The shaft shall click in locked
position.
Check that the rear wheel is attached to the
chassis properly by pulling the wheel. Repeat on
both sides.
WARNING
Check that the wheel is firmly fixed
and can not be pulled from the chassis.
WARNING
Avoid driving over sharp objects or
sufaces eg. glass or the tyre can be punctured
WARNING
To achieve optimum handling and
to avoid punctures, air pressure should be
correct. Please check the air pressure at regular
intervals (see marking on the tyre).
3) ASSEMBLY OF THE FRONT WHEELS
3.1 Press in the button on the front section of
the pram and push in the front wheel. Release
the button and check that the front wheel is
attached to the chassis properly by pulling the
wheel. Repeat on both sides.
3.2 This is how the chassis should look when
fully assembled. (as illustrated in the picture).
4) FOLDING THE CHASSIS
4.1 Take off the carrycot or the seat unit.
Turn the chassis so that the front wheels are
pointing forward (as illustrated in the picture).
Make sure that the shopping basket is empty
before folding the chassis.
WARNING
There must not be a child in the
pram when it is folded or unfolded.
WARNING
Avoid having children in the vicinity
when the pram is folded or unfolded.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
4.2 Adjust the handle in the low position.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
4.3 Open both clips on the telescopic handle.
WARNING
Ensure that children are kept away
NXT SELECT V1.2
from all moving parts of the pram to avoid risk
of injury.
4.4 Push the telescopic handle down to the
lowest point
4.5 Slide the grey safety button to the middle
(with the left hand) and simultaneously press
the grey button under the handle (with the right
hand) and move to the center. Hold the left
safety button and the right handle and lift up a
little bit.
4.6 You can now release the left hand and lift
the handle up to fold the pram.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
4.7 The pram is now folded.
4.8 If you want to make the chassis more
compact, you can remove the wheels. This
can be done both before or after you fold the
chassis.
5) REMOVING THE BACK WHEELS
5.1 Release the shafts and wheel by, (1) press
down the grey button and at the same time (2)
open the grey clip. Loosen the shaft by pressing
the button on the rear wheel and pull out the
shaft.
6) REMOVING THE FRONT WHEELS
6.1 Press the grey button on the front part of the
chassis and pull the front wheel off.
7) LOCKING THE BRAKE
7.1 Stop the pram by pressing the brake pedal
all the way with your foot.
WARNING
Never leave the child unattended in
the pram without engaging the brake
WARNING
The brake should always be applied
when you lift your child in or out of the pram.
WARNING
Never park the pram on a slope.
WARNING
Always check that the pram is
properly parked.
8) RELEASE THE BRAKE
8.1 Release the brake by lifting the brake bar
upwards with your foot.
8.2 If the pram is equipped with a safety leash:
Insert your hand into the leash for safety.
WARNING
This product is not suitable for
jogging, skating or rollerblading.
SE
EN
CZ
DE
DK
EE
ES
FI
NO
SVK
BG
FR
GR
HR
HU
IS
IT
LV
LT
ML
NL
PL
RO
PT
RS
RU
SL
TR
45
Werbung
Inhaltsverzeichnis
