Assembly And Use Of The Seat Unit - Emmaljunga NXT90 Gebrauchsanweisung

Assembly and use of the seat unit

1
2
3
4
5
NXT 90 v 1.2
Downloaded from www.Manualslib.com manuals search engine
ASSEMBLY OF THE SEAT UNIT
The seat unit is delivered fully assembled. Only the bumper bar
and the hood must be assembled.
ASSEMBLY OF THE BUMPER BAR
• Insert the bumper bar into the brackets on both sides of the
seat.
WARNING
• The bumper bar should always be assembled when in use.
• Always check that the bumper bar is correctly assembled before
use.
• Fasten the crotch strap around the bumper bar
OPEN THE BUMPER BAR
• Unbutton the crotch strap.
• Press the button on the inside and open the bumper bar.
WARNING
• The bumper bar should always be assembled when in use.
• Always check that the bumper bar is correctly assembled before
use.
CLOSE THE BUMPER BAR
• Click the bumper bar into the bracket until you hear a "click".
WARNING
• Ensure that children are kept away from all moving parts
of the pram to avoid risk of injury.
• Fasten the crotch strap around the bumper bar.
ASSEMBLY/USE OF THE HOOD
• Insert the hood into the seat unit frame.
Please note:
• If the hood is moved up and down on the handlebar, scratches
can occur on the paint. Keep the handlebar clean from dirt and
dust.
WARNING
• Ensure that children are kept away from all moving parts
of the pram to avoid risk of injury.
75