Seat Unit; Assembly Of The Seat Unit, Assembly Of The Bumper Bar; Open The Bumper Bar; Close The Bumper Bar - Emmaljunga NXT90 Anleitungen

Seat Unit

Assembly of the Seat Unit, Assembly of the Bumper Bar

1
1.1 The seat unit is delivered fully assembled. Only the bumper bar and the hood must be assembled.
Insert the bumper bar into the brackets on both sides of the seat.
WARNING The bumper bar should always be assembled when in use.
WARNING Always check that the bumper bar is correctly assembled before use.
1.2 Fasten the crotch strap around the bumper bar.

Open the Bumper Bar

2
2.1 Unbutton the crotch strap.
Press the button on the inside and open the bumper bar.
WARNING The bumper bar should always be assembled when in use.
WARNING Always check that the bumper bar is correctly assembled before use.

Close the bumper bar

3
3.1 Click the bumper bar into the bracket until you hear a "click".
Fasten the crotch strap around the bumper bar.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.

Assembly / Use of the Hood

4
4.1 Insert the hood into the seat unit frame.
Please note: If the hood moves up and down on the chassis this can cause scratches. Ensure the handlebar is
free from dust and dirt.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
4.2 Close the zipper between the hood and the seat unit. Make sure the zip is closed all the way.

Adjust the Hood

5
5.1 Pull the hood gently forward or backward to the desired position.

Extending the Hood

6
6.1 To extend the hood to protect the child from weather you can open the top zip.
Please note! Check that you have not opened the incorrect zipper that secures the hood to the seat unit.
WARNING The hood should always be fitted when the pram is in use.
6.2 Pull the hood down and the hood extends, There is a ventilation and UV/insect net when you open the zip at
the back of the hood (only on certain models).
IMPORTANT! The hood cannot be folded down when the apron is attached to the hood.
7 UV/Insect Net (only on certain models)
7.1 Attach the UV/Insect net using the zipper on the hood
7.2 Use the press stud to secure the insect net around the band on the seat unit. Repeat on the other side.

Assembly of the Seat Unit on the Chassis

8
8.1 Click the seat unit into the chassis, make sure it clicks in properly and securely.
WARNING Use the press stud to secure the insect net around the band on the seat unit. Repeat on the other
side.
WARNING Always check that the seat unit is properly fixed firmly to the chassis before the pram is used.
9

To take off the Seat Unit from the Chassis

9.1 Pull both handles upwards and lift the seat unit off the chassis
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING Never leave a child in the seat unit when removing the seat unit.
WARNING Hold the carrying handle until the unit is in place.
9.2 The seat unit can be adjusted into different positions, lift the handle at the back of the seat unit up and adjust
to desired position.
WARNING Always check that the seat unit is in one of the positions by pushing it back until it locks into place.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
NXT 90 v 2.5
39