Drivers For Components And Operating Systems; Installation Of Software; Image Files For Data Backup; Sound Module - Siemens SIMATIC IPC547G Produktinformation

Slots for internal expansion cards
Note
Use the module clamp to secure the expansion cards installed at a later time. We recommend securing the cards in direction
of the device front. When installing the clamp, make sure that you do not damage any of the components on the expansion
cards.
The PCIe expansion card should be used as a plant bus as follows:
• CP1623 or BCE communication card: Slot 4 (already installed in the respective bundle)
• Redundant communication card: Slot 5
Slot for multi-monitor graphics card
You can expand your device with a multi-monitor graphics card. Use the PCI Express slot 1 (PCIe x16) for this.

Drivers for components and operating systems

The drivers for components are stored in the "C:\Windows\ConfigSetRoot\Drivers" folder of the restored system or on the
Restore USB stick in the "Drivers" folder.

Installation of software

Use the "A1 image" for the installation of software and an associated functional change of the device (see "Scope of delivery
of the software (Page 16)").

Image files for data backup

Use the SIMATIC IPC Image & Partition Creator V3.5.4 or higher to create image files for data backup.
Please make sure that your PC has the newest BIOS version before you use the SIMATIC IPC Image & Partition Creator.

Sound module

Your device is equipped with a sound module (onboard).
NOTICE
Adherence to the specified limits for noise immunity and interference emission is not guaranteed
Adherence to the values listed in the technical specifications relating to noise immunity and interference emission is not
guaranteed when using microphone IN.
• Always use the LINE OUT port of the sound module for playback.
• The sound module is not approved for microphone IN.

Authorizations for use for Windows Server

By default, a software package for Windows Server contains 5 workstation licenses (5 CAL = Client Access Licenses). Always
ensure your are using the correct number of licenses. The "per server" licensing model with 5 workstation licenses (CALs) is
preset on your system.
If you would like to increase the number of workstation licenses or change the licensing model, refer to the help for
Windows Server.
You can find information on this on the Internet at:Microsoft TechNet (https://docs.microsoft.com/en-us/windows-server/)
SIMATIC IPC547G
A5E42575948-AA, 05/2021
21