Kalor Denia 14 Bedienungsanleitung Seite 51

Fan speed adjustment channeling (if any)
menu 01
ADJUST
BLOWERS
menu 01
vent - 2 3
menu 01
vent - 2 5
menu 01
vent - 2 5
Display informations
OFF
21 : 10
The stove is off.
22°C P-1
off
START
14 : 35
The stove is switching on.
21°C P-2
Resistance and smokes extractor
start
are on.
LOAD PELLET
14 : 35
The stove starts loading pellets
21°C P-2
in the brazier.
load
Resistance, smokes extractor
pellet
and gear motor are on.
Menu 01 - Setting fans
1.
Press the SET button.
Will appear on the display MENU 01 SETTING FANS.
2.
Pressing the SET key to access the menu to set the speed of
your funnel fans.
3.
Set the speed using the buttons 1 and 2. With key 1 you set
the speed of the right fan, with key 2 you set the speed of
theleft fan.
4.
To turn off the fans of the funnel, set the speed to 0.
14 : 35
22°C P-1
flame
light
15 : 18
22°C P-3
work
15 : 18
22°C p-2
cleaning
fire-pot
FLAME LIGHT
The stove starts loading pellets in
the brazier.
Smokes extractor and gear motor
are on.
WORK
The stove is working, in this case
with working power 3. Detected
room temperature is
Smokes ventilator, gear motor and
room ventilator are on during this
phase
.
CLEANING FIRE-POT
The stove is cleaning the brazier.
The smokes extractor is working
at its max. speed and the pellets
loading is minimal.
page 15 of 36
21°C.