Kalor Denia 14 Bedienungsanleitung Seite 49

Stove switching off
To switch off the stove, press the key on the control board until you read on the display. After the
" " C LEAN IN G FINA L C LEAN IN G FINA L" "
stove has been switched off, the fan continues working for a set time in order to grant a fast smokes exhaust from the
combustion chamber.
If you have a model with remote control, you just need to switch the remote control off keeping the key pressed for 2
seconds and confirming the selection pressing the key SEND.
If you try to switch on the stove during this phase, the display will show that means wait for cooling)
" " wa iting co olin g wa iting co olin g " " (
in order to inform you a switching off phase is running. Wait until the cooling phase is completely off and the display
shows before staring a new light up.
" " OF F OF F" "
REMARKS:
• Do not continuously turn the stove on and off as this could provoke sparks that could shorten the life of the electrical
components.
• Do not touch the stove with wet hands: the stove has electrical components that could produce sparks if handled
incorrectly. Only authorized technicians can resolve possible problems.
• Do not remove any screws from the fire chamber without first lubricating them well.
• Never open the glass door of the pellet stove while the stove is in operation.
• Be sure that the brazier basket is positioned correctly.
• The flue system must be suitable for inspecion. If it cannot be removed, it must have some holes for inspection and
cleaning.
page 13 of 36