Safety Instructions; Explosion Risk - Baumer Hubner Berlin PMG 10 - SSI Montage- Und Betriebsanleitung

SAFETy AND ATTENTION INSTRUCTIONS
2.
SAFETY AND ATTENTION INSTRUCTIONS
2.1

Safety instructions

Explosion risk

Spark formation can cause a fire or an explosion.
» Do not use the encoder in areas with explosive and/or highly infl ammable materi-
als. They may explode and/or catch fire by possible spark formation.
Risk of serious injuries due to rotating shafts
Hair and clothes may become tangled in rotating shafts� Touching the rotating parts
can cause extremely serious injuries�
» Before all work switch off all operating voltages and ensure machinery is statio-
nary�
» Prevent reconnection operating voltages by third parties�
Risk of serious injuries due to consequential damages
Plants can be deregulated due to malfunction or faulty signals of the encoder�
» Damage caused by faulty operation or by a malfunction of the encoder must be
eliminated by corresponding safety measures�
Risk of burns due to formation of heat
The encoder heats up at higher speed so there is a serious risk of burning shortly
after the machine has been turned off�
» Examine carefully whether the encoder overheats� Wear suitable gloves if neces-
sary�
3/29
MB245EN - 11171693, 17A1, Baumer_PMG10-SSI_II_EN