Werock Scoria M240 Betriebsanleitung Seite 98

The changes are applied immediately.
Define behavior when the scan key is triggered
The behavior of your device when you press the scan key can be customized. You can choose between:
1.
scanning as long as one of the scan buttons is pressed
2.
scanning until a code is captured
3.
continuous scanning
To customize the behavior when the scan button is triggered, do the following:
1.
In the Scanner Configuration app, tap the gear icon in the upper right corner.
2.
Then tap on "General Settings".
3.
Now tap on "Scan Mode Selection" and make your selection.
4.
Confirm the new behavior by tapping on "OK". The changes become active immediately.
Scoria M240 User Manual
98 / 120