Version Information; Updates - Werock Scoria M240 Betriebsanleitung

Turning the device on and off and triggering shutdown
The device triggers scanning by sending instructions to the framework layer through the app. You must turn
on the operation before using the scan. The command code is as follows:
Power on Operation
The trigger scan can be realized after power on, the code to trigger and close the scan head:

Version information

Version Datum
1.0
1.1 04.08.2022

Updates

This manual is constantly updated to provide you with the best available information at all times. If you need
an old version of the manual, do not hesitate to contact us.
Manual version
1.0
Scoria M240 User Manual
Notizen
Initial release
Complete revision and standardization of content
Date Changes
08.08.2022 Initial publication of the operating instructions
120 / 120