Werock Scoria M240 Betriebsanleitung Seite 102

green. The change becomes active immediately.
Enabling Picklist Mode
The multi-scan mode allows the scanner to decode multiple barcodes at once. This is useful if you have
several barcodes right next to each other and want to capture them simultaneously
To activate the "Picklist Mode" proceed as follows:
1.
In the Scanner Configuration app, tap the gear icon in the upper right corner.
2.
Then tap on "General Settings".
3.
To activate the picklist mode, tap on the toggle switch at "Picklist mode" so that it is highlighted in
green. The change becomes active immediately.
Activating the Multi-scan mode
Multiscan mode allows the scanner to decode multiple barcodes at once. This is useful if you have several
barcodes right next to each other and want to capture them simultaneously
To activate the "Picklist Mode" proceed as follows:
1.
in the Scanner Configuration app, tap the gear icon in the upper right corner.
2.
then tap on "General Settings
3.
now tap on "Multi-scan mode"
4.
To activate the multi-scan mode, tap on the toggle switch at "Enable multi-scan" so that it is
highlighted in green. 5
5.
Enter the number of barcodes to be scanned simultaneously under "Multi-scan count". A maximum
of 5 barcodes can be captured at the same time.
6.
tap "OK" to confirm.
Reducing the risk of incorrect barcode capture
The decoder provides four levels of decoding security for delta barcodes, including the Code 128 family,
UPC/EAN, and Code 93. Select increasing security levels for decreasing barcode quality. There is an
inverse relationship between the security and the aggressiveness of the decoder, so select only the security
level that is required for a particular application.
Security Level 0: This setting allows the decoder to operate at its most aggressive state while providing
adequate security for decoding most "in-spec" bar codes.
Security Level 1 (default): Select this option when miscoding occurs. This default setting eliminates most
miscoding.
Security Level 2: Select this option if Security Level 1 does not eliminate miscoding.
Security Level 3: Select this security level if misdecodings still occur even with security level 2. Please note,
selecting this option is an extreme measure against decoding barcodes that do not meet specifications.
Scoria M240 User Manual
102 / 120