Werock Scoria M240 Betriebsanleitung Seite 104

Selecting the barcode types used
Disabling supported barcode types can be useful to increase the performance of the integrated scanner and
reduce erroneous scans. To do this, proceed as follows:
1.
In the Scanner Configuration app, tap the gear icon in the upper right corner.
2.
then tap on "Symbologies"
3.
in the overview, select the barcode types you are using. The toggle on the right side is highlighted in
green if the corresponding type is activated. Tap on the toggle switch to activate or deactivate the
recognition. The changes are applied immediately.
Configuration transfer to multiple devices
Setting up many devices at the same time can be annoying. There are two ways to transfer the configuration
of the barcode scanner from one device to another:
1.
by means of a configuration file
2.
via a special configuration barcode
This function is only available as of version 1.4 of the Scanner Configuration App
Distributing the configuration to different devices
Configuration transfer by means of a configuration file
To copy the configuration of one device to another device, proceed as follows::
1.
open the Scanner Configuration App of the first device
2.
tap on the cogwheel symbol in the upper right corner
3.
Tap on „General settings"
Scoria M240 User Manual
104 / 120