Werock Scoria M240 Betriebsanleitung Seite 90


US Postnet

US Planet

Japan Postal

Australia Post

Netherlands KIX Code

GS1 DataBar-14

GS1 DataBar Limited

GS1 DataBar Expanded

Composite CC-C

Composite CC-A/B

Composite TLC-39

Chinese 2 of 5

Korean 3 of 5

USPS 4CB/One Code/Intelligent Mail

UPU FICS Postal

Matrix 2 of 5

PDF417

MicroPDF417

DataMatrix

QR Code

Maxicode

MicroQR

Aztec

Han Xin

DotCode
Barcode scanner setup
In the Scanner Configuration App, tap the gear icon in the upper right corner and then tap "General settings"
to make settings about the barcode scanner.
Confirmation of successful reading
To let you know if your barcode was successfully captured, you can get an additional confirmation from your
device. There is an option to receive a beep, a short vibration, or both at the same time. To make these
settings, do the following:
1.
in the Scanner Configuration app, tap the gear icon in the upper right corner.
2.
Then tap on "General Settings".
3.
to enable audible notification, tap the toggle switch at "Sound" so that it is highlighted in green.
4.
To activate a haptic notification, tap the toggle switch at "Vibrate" so that it is highlighted green.
Scoria M240 User Manual
90 / 120