Energy Saving - JUNO JB121D0 Benutzerinformation

28
Number of cavities
Heat source
Volume
Type of oven
Mass
* For European Union according to EU Regulations 65/2014 and 66/2014.
For Republic of Belarus according to STB 2478-2017, Appendix G; STB 2477-2017, Annexes
A and B.
For Ukraine according to 568/32020.
Energy efficiency class is not applicable for Russia.
EN 60350-1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens
and grills - Methods for measuring performance.

Energy saving

The oven has features which
help you save energy during
everyday cooking.
Make sure that the oven door is closed
when the oven operates. Do not open the
oven door too often during cooking. Keep
the door gasket clean and make sure it is
well fixed in its position.
Use metal cookware to improve energy
saving.
When possible, do not preheat the oven
before cooking.
Keep breaks between baking as short as
possible when you prepare a few dishes
at one time.
Cooking with fan
When possible, use the cooking functions
with fan to save energy.
Residual heat
If a programme with the Duration or End
Time selection is activated and the
cooking time is longer than 30 min, the
heating elements automatically turn off
earlier in some oven functions.
The fan and lamp continue to operate.
When you turn off the oven, the display
1
Electricity
72 l
Built-In Oven
30.1 kg
shows the residual heat. You can use that
heat to keep the food warm.
When the cooking duration is longer than
30 min, reduce the oven temperature to
minimum 3 - 10 min before the end of
cooking. The residual heat inside the oven
will continue to cook.
Use the residual heat to warm up other
dishes.
Keep food warm
Choose the lowest possible temperature
setting to use residual heat and keep a
meal warm. The residual heat indicator or
temperature appears on the display.
Cooking with the lamp off
Turn off the lamp during cooking. Turn it
on only when you need it.
Moist Fan Baking
Function designed to save energy during
cooking.
When you use this function the lamp
automatically turns off after 30 sec. You
may turn on the lamp again but this action
will reduce the expected energy savings.
Deactivating the display
You can turn off the display. Press and
hold and at the same time. To turn
it on repeat this step.