Machine Information - Ferm MSM1037 Originalbetriebsanleitung

MITRE SAW
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2 - 4
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always func­
tions properly. The operating instructions
and the accompanying documentation
must be kept in the vicinity of the device.
Intended use
The electric tool is intended as a stationary
machine for making straight lengthways and
crossways cuts in wood. Horizontal mitre angles
of -45° to +45° as well as vertical bevel angles of
-45° are possible.
Contents

1. Machine information

2. Safety
3. Mounting accessories
4. Operation
5. Service & Maintenance
1. MAChInE InFoRMATIon
Technical specifications
Mains voltage
Capacity
Machine class
No load speed
Saw blade measurement
Angle for mitring
Angle for bevelling
Mitre saw maximum sawing capacity:
Mitre 0º, Bevel 0º
Mitre 45º, Bevel 45º
Mitre 45º, Bevel 0º
Mitre 0º, Bevel 45º
Weight
L (sound pressure)
pa
L (acoustic capacity)
wa
Vibration level
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in EN
61029-1; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
- using the tool for different applications, or with
- the times when the tool is switched off or when
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping your
hands warm, and organizing your work patterns.
Package contents
1 TCT Saw blade: 210 x 30mm (T48)
1 Workpiece clamp
1 Dust bag
1 Carbon brush set
1 Rear support
2 Side extensions
1 Hex key
1 Pair of safety glasses
230-240V,~ 50Hz
1 Set earplugs
1300 W
Check the machine, loose parts and accessories
II (double insulated)
for transport damage.
4500/min
210x30x2.5mm
45º (left and right)
different or poorly maintainted accessories,
may significantly increase the exposure level.
it is running but not actually doing the job, may
significantly reduce the exposure level.
45º (only left)
55x120mm
32x80mm
55x80mm
32x120mm
6.6 kg
91 dB(A), KpA: 3dB
104 dB(A), KwA: 3dB
<2.5 m/s
2
5