Page EN-28
Troubleshooting table
Problem
Possible cause
Suction channel is
blocked.
Suction
force is
weak.
The dust bin is full.
Filters are inserted
incorrectly or are
dirty.
Dust is
Filters are inserted
escaping
incorrectly or are
from the
defective.
appliance.
Solutions, tips
Switch off the appliance and
pull out the mains plug from the
socket. Clear any blockages from
the nozzles and suction hose
(see Page EN-25).
Empty the dust bin.
Insert the filters correctly or
clean/replace them with new
ones (see Page EN-21).
Insert the filter correctly or
replace it with a new one.