hanseatic HVUR4007BMC Gebrauchsanleitung Seite 56

Page EN-22 Care and maintenance
4. Remove the seal (24) from the
dust bin (10).
5. Turn the seal (24) and the filter
screen (25) anticlockwise to
loosen the connection.
6. Remove the filter screen (25)
from the seal (24).
7. Remove the filter holder (26)
and remove the foam filter (27)
from the filter holder (26).
8. Clean the foam filter (27), filter
holder (26), filter screen (25),
seal (24) and dust bin (10) with
warm water and a little wash-
ing-up liquid.
9. Allow all parts to air-dry com-
pletely.
(24)
(10)
10. Put the foam filter (27) back
into the filter holder (26) and
push the filter holder (26)
(25)
back into the dust bin (10).
(24)
11. Place the filter screen (25) on
the seal (24) and lock it by
turning it clockwise.
(26)
(27)
12. Align the seal (24) and place
it back into the dust bin (10).
(10)
13. Close the lid of the dust
bin (10).
The lid will audibly snap into
place.
(26)
(27)
(10)
(25)
(24)
(24)
(10)