Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-24
Care and maintenance
(28)
5. Use scissors to cut any hairs
or threads that have become
wound around the brush (28)
and remove them.
Make sure that you don't cut
any of the brush bristles.
Replacing the brush/drive
belt
1. Follow steps 1–3 as described
in the previous section.
2. Unscrew the 6 screws with the
help of a cross-headed screw-
driver.
3. Remove the brush cover (29).
(30)
4. Lift the brush (28) on the side
of the drive belt (30) out of the
holder and pull the brush (28)
out.
5. Remove the drive belt (30) too.
(29)
(28)
Werbung
Inhaltsverzeichnis
