Alarm Mode - Sainlogic FT0835 Benutzerhandbuch

Note: If plugged into AC power, the backlight will remain on. It is not
recommended leaving the backlight on for a long period of time when
operating on batteries only, or the batteries will run down quickly.

8.Alarm Mode

The FT0835 includes the following alarms:
 Time(Alarm1 and Alarm2)
 Wind Gust
 Wind Average
 Outdoor Temperature
 Outdoor Humidity
 Outdoor Feels Like Temperature
 Outdoor Dew Point
 Hourly Rainfall
 24 Hour Rainfall
 Absolute Pressure
 Relative Pressure
 Indoor Temperature
 Indoor Humidity
8.1 Alarm Operation
When an alarm condition is exceeded, the alarm icon will flash
(visual) and the alarm beeper will sound (audible). To silence the
beeper, press any key.
8.2 Viewing the High and Low Alarms
To view the current alarm settings, press the ALARM key to enter the
alarm mode. HI will be displayed in the time area. At the same time
Alarm time parameters of out/indoor temperature/humidity, rain, feels
like, wind gust, wind average, and dew point are displayed.
Press ALARM key again to view the LOW alarms along with the alarm
clock time the same way HI alarms.
Press the SNOOZE key at any time to return to the normal mode.
22