Sainlogic FT0835 Benutzerhandbuch Seite 20

7.2 Set (Program) Mode
While in Normal Mode, Press and hold the SET key for at least three
seconds to enter the Set Mode. The first setting will begin flashing. You
can press the SET key again to skip any step, as defined below.
Note: In the Set mode, press the [+] key or [-] key to change or
scroll the value. Hold the [+] key or [-] key for three seconds to
increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE button
of the display console.
1. 12/24 Hour Format (default: 24h):.Press the SET key again to
adjust the 12/24 hour format setting (FMT). Press the [+] key or [-]
key to change between 12 hour and 24 hour format.
2. Change Hour.press the SET key again to set the hour. Press the [+]
key or [-]key to adjust the hour up or down. Note the PM icon is
present during afternoon hours.
3. Change Minute.Press the SETkey again to set the minute. Press
the [+] key or [-] key to adjust the minute up or down.
4. Date Format (default: MM-DD): Press the SET key again to enter
the day/month format mode. Press the [+] key to switch between M-
D, D-M.
5. Change Month.Press the SET key again to set the calendar month.
Press the [+] key or [-] key to adjust the calendar month.
6. Change Day.Press the SET key again to set the calendar day.
Press the [+] key or [-] key to adjust the calendar day.
7. Change Year. Press the SET key again to set the calendar year.
Press the [+] key or [-] key to adjust the calendar year.
8. Max/Min Clearing (default: ON). Press the SET key again to set
the max/min clearing mode (CLR). The Max/Min can be
programmed to clear daily (at midnight) or manually. Press the [+]
key or [-] key to switch between "Clears 24h" and Clears Manually.
9. Temperature Units of Measure (default: °C):. Press the SET key
again to change the temperature units of measure (the UNITSET
icon will be displayed). Press the [+] key or [-] key to switch
between °F and °C units of measure.
10. Wind Speed Units of Measure (default: m/s). Touch the SET key
again to change the wind speed units of measure . Touch the [+]
key or [-] key to toggle the wind speed units between
m/s,bft,knots,mph or bft.
19