Sainlogic FT0835 Benutzerhandbuch Seite 10

Replace the battery door, and fold out the desk stand and place the
console in the upright position.
The unit will instantly display indoor temperature, humidity, pressure,
tendency, moon phase, and time. The wind speed, wind gust, wind
direction, rain, outdoor temperature and humidity will update on the
display within a few minutes. Do not Press any menu buttons until the
outside transmitter report in, otherwise the outdoor sensor search mode
will be terminated. When the outdoor transmitter data has been
received, the console will automatically switch to the normal mode from
which all further settings can be performed.
While in the search mode, the remote search icon will be constantly
displayed.
Note: The power adapter is intended to be correctly oriented in a
vertical or floor mounted position. The prongs are not designed to hold
the plug in place if it is plugged into a ceiling, under-the-table or cabinet
outlet.
Figure 9
1: Fold out the desk stand and see DC jack on the left ; as shown in
Figure 10
9