Sainlogic FT0835 Benutzerhandbuch Seite 15

Medium
Glass (untreated)
Plastics
Wood
Brick
Concrete
Metal
5. Final Installation of Sensor
Integrated outdoor transmitter installation.
Professional Wireless Weather Station can be used in both the
Northern and Southern Hemispheres.
Prior to installation, you will need to calibrate the wind direction.
5.1. Northern Hemispheres (NOR).
The cardinal directions (N, S, E, W) molded on the body of the outdoor
sensor are indicators for the Northern Hemisphere only.
Step 1:There is a "S" indicator on the wind vane that indicates South,
as shown in Figure 14. Align this "S" marker in the direction of South.
Step 2: Console operation is set to Northern Hemispheres ( NORin the
time area) in Location division.
Note: There are four alphabet letter of "N","E","S"and "W" around
the wind direction, representing for the direction of North, East, South
and West. Wind direction sensor has to be adjusted so that the
directions on the sensor are matching with your real location.
Permanent wind direction error will be introduced when the wind
direction sensor is not positioned correctly during installation.
RF Signal Strength Reduction
5-15%
10-15%
10-40%
10-40%
40-80%
90-100%
14