Snooze Mode; Back Light Mode - Sainlogic FT0835 Benutzerhandbuch

Press the MIN/MAX/- key again (do not hold), and the MIN icon will be
displayed. Press the SET key to view pressure (ABS or REL) min value,
pressure (ABS or REL) min value ,outdoor temperature (temperature,
dew point or feels like).
Next, Press and hold the MIN/MAX/- key for three seconds(and the
CLRcharacter isflashing in time area) to clear the pressure, temperature
and humidity minimum values. The minimum values will now display the
current values.
Press the SNOOZE key to exit the min/max checking and cleaning
mode, return to normal display mode.

7.5 Snooze Mode

If the alarm sounds, and you wish to silence the alarm, press the
SNOOZE key, the backlight will turn on. The alarm icon will continue to
flash and the alarm will silence for five minute. press any key
(MIN/MAX/+ ,SET, ALARM,CHANNEL/+) to permanently exit the
Snooze mode.

7.6 Back light Mode

If the LED is off, Press the SNOOZE button once. The backlight will turn
on for five seconds, and if no operation is performed for three seconds,
the backlight will turn off.
The backlight operation is different when operating on batteries to save
power.
ADJUSTABLE BACKLIGHT BRIGHTNESS
There are 3 levels of brightness of backlight. When the backlight is on
press SNOOZE key to switch between the 3 levels.
Press and hold the LIGHT key for two seconds, and the backlight will
turn on permanently, and display BL ON icon will be displayed for three
seconds in the time field.
To turn off the backlight at any time, Press and hold the
SNOOZE/LIGHT key for two seconds, and BL OFF icon will be
displayed for three seconds in the date field.
21