TERMA MOA Gebrauchsanweisung Seite 12

5. Check the distances between the indi-
vidual heating element tubes and bend
if necessary.
5 mm
6. Do not switch the heating element on if
it is not fully immersed in radiator heat-
ing medium.
7. Make sure an adequate air cushion is pre-
sent to protect against excessive pressure
build up within the heater (always leave
one of the radiator valves open).
8. When filling the radiator with hot liquid
insure that the liquid temperature does
not exceed 65° C.
9. Follow the subsequent guidelines when
connecting the electrical installation:
a. Brown wire — live connection to the
circuit (L).
b. Blue wire — connect to neutral (N)
c. Yellow & green wire — earth connec-
tion (PE).
12
User manual MOA
10. Before filling the radiator with heating
11. In central heating installation radiator
12. The temperature of the heating agent in
2-3 mm
13. For detailed installation hints — see the
Notes prior to removal:
1. Before dismantling permanently, discon-
2. Be aware. A radiator filled with liquid can
3. Before disassembly, close the appropri-
medium, ensure that the heating element
is fitted properly and that it is water tight.
must be fitted with the valves enabling
disconnection of the radiator from the
rest of the system.
the central heating system must not ex-
ceed 82° C!
last pages of this manual.
nect the heating element from the mains
and ensure that the radiator is not hot.
be very heavy. When moving the radia-
tor, ensure that you take the necessary
safety precautions.
ate valves and drain the radiator com-
pletely to avoid causing any damage.