Ec Declaration Of Conformity; Safety Instructions - DeWalt D24000 Originalanweisungen

TILE SAW D24000
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.
Technical data
Voltage
(U.K. & Ireland only)
Type
Power input
No-load speed
Disc diameter
Disc bore
Disc body thickness
Type of cutting disc
Max. peripheral speed cutting disc
Bevel settings
Max. ripping capacity
Depth of cut at 90°
Max. workpiece dimensions
Tile (granite)
Block (fi red clay)
Max. load
Tile (granite)
Block (fi red clay)
Overall dimensions
Nominal weight
Max. allowable weight (with water)
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029-1:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
WALT one of the most reliable
E
D24000
V 230
V 230/115
2
W 1,600 / 1,500
-1
min 4,200
mm 250
mm 25.4
mm 1.5
straight, non-recessed
(continuous rim)
-1
min 5,000
° 22.5/45
mm 610
mm 95
cm 64.5 x 64.5 x 1.2
cm 30.5 x 30.5 x 9.0
kg 13
kg 20
cm 86.4 x 68.6
kg 32
kg 51
dB(A) 90.0
dB(A) 3.0
dB(A) 103.0
dB(A) 3.1
m/s² 2.4
m/s² 1.5
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.30 Ω at the
interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
D24000
D WALT declares that these products described under "technical data" are
E
in compliance with:
2006/42/EC, EN 61029-1.
These products also comply with Directive 2004/108/EC. For more
information, please contact D
E
back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
29.12.2009

Safety Instructions

WARNING! When using electric tools basic safety precautions
should always be followed to reduce
the risk of fire, electric shock and personal injury
including the following.
Read all these instructions before attempting to operate this product and
save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or wet
conditions. Keep the work area well lit (250-300 Lux). Do not use
WALT at the following address or refer to the
WALT.
E
E N G L I S H
33