Ec Declaration Of Conformity; Technical Data - DeWalt DW340 Handbuch

HEAT GUN DW340
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage
Type
Power input
Air temperature range (at nozzle)
Weight
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW340
D WALT declares that these products described
E
DW340
under "technical data" are in compliance with:
V 230
2006/42/EC, EN 60335-1, EN 60335-2-45.
DC
2
These products also comply with Directive
2004/108/EC. For more information, please contact
W 2.000
D WALT at the following address or refer to the
E
°C 50-600
back of the manual.
kg 0.85
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
E
10 Amperes, mains
13 Amperes, in plugs
Horst Grossmann
Vice President Engineering and Product
Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
31.12.2009
General Power Tool Safety Warnings
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
EN G LI SH
19