Technical Data - Bosch GCM 10 SD Professional Originalbetriebsanleitung

OBJ_BUCH-1128-004.book Page 28 Wednesday, April 15, 2015 4:58 PM
28 | English
8 Retracting blade guard
9 Roller
10 Insert plate
11 Locking bracket
12 Locking knob for various mitre angles
13 Mitre detent lever
14 Bevel lock lever
15 Detents for standard mitre angles
16 Saw table
17 Mounting holes
18 Fence
19 Fence extension
20 Locking screw for fence extension
21 Quick-action clamp
22 Angle indicator (vertical) for rightward bevel angle
range
0 – 45°
23 Slide device
24 Cable holder
25 On/Off switch
26 Transport safety-lock
27 Adjusting screw of depth stop
28 Transport handle (rear)
29 Locking screw for slide device
30 Scale for bevel angle
31 Angle indicator (vertical) for leftward bevel angle
range
45°– 0
32 Adjustment knob for 33.9° bevel angle
33 Socket spanner (14 mm)/Hex key (4 mm)/Cross-head
screwdriver
34 Lock screw of the material stop
35 Material stop
36 Saw-table extension
37 Tensioning lever for saw-table extension
38 Scale for mitre angle

Technical Data

Sliding Mitre Saw
Article number 0 601 B22 ...
Rated power input
No-load speed
Weight according to EPTA-Procedure 01/2003
Protection class
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Mounting hole diameter
Permissible workpiece dimensions (maximum/minimum) see page 32.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0,15 ohm.
1 609 92A 19J | (15.4.15)
39 Rotary knob for adjustment of the bevel angle range
40 Spindle lock
41 Locking lever
42 Open-end spanner (17 mm; 10 mm)
43 Hex key (3 mm)
44 Hex key (1,5 mm)
45 Extraction adapter
46 Chip ejector
47/48
Cross-head screw (attachment of retracting blade guard)
49 Hexagon bolt for saw-blade attachment
50 Washer
51 Clamping flange
52 Interior clamping flange
53 Holes for quick-action clamp
54 Clamping lever of the quick-action clamp
55 Threaded rod
56 Screws for insert plate
57 Clamping screw of the material stop
58 Button for rapid-setting of the adjusting screw 27
59 Depth stop
60–63
Set screws for 0° basic setting (bevel angle)
64 Set screw for 45° basic setting (leftward bevel angle)
65 Set screw for 45° basic setting (rightward bevel angle)
66 Set screw for clamping force of lock lever 14
67 Set screw for clamping force of clamp 3
68 Mitre angle indicator
69 Adjustment screw of the fence extension
70 Hex socket screws (14 mm) of the fence
71 Recessed handles
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
... 503
... 508
... 532
... 542
W 1800
-1
min 5000
kg 27
/II
mm 254
mm 2.0
mm 30
GCM 10 SD
... 537 ... 541
1800 1450
5000 4500
27 27
/II /II
254 254
2.0 2.0
25,4 30
Bosch Power Tools